Residents living in high-level households may often encounter the phenomenon of toilet deodorant, it is a headache. That is, clean and tidy bathroom will become stinky days, this time on the need for toilet anti-overflow device to help. What is the method for installing the toilet bag? The following will tell you about.

1. Outdoor sewage pipe or sewage pipe has been overloaded caused by sewage water level rise to the top of the vertical sewage pipe and entrainment of the air flow is not out from the second floor of the toilet in the anti-counterfeit. Spilled or pool flooding. The following are the same as the "

2. Housing settlement of the formation of sewage pipes on the slope, gas, water discharge caused by poor anti-spray. The following are the same as the "

3. Rivet pipe turn around the funnel-like plugging poor drainage caused by anti-spray. The following are the same as the "

The following are the same as the "

4. A large number of infiltration of groundwater in the outdoor sewage wells resulted in poor drainage of the pipeline at full capacity.

The following are the same as the "

5. The normal pipeline at the same time the discharge of sewage at the same time due to pressure will appear to smoke and other phenomena. The following are the same as the "

6. Professional installation of toilet anti-overflow device, water tank anti-overflow device, floor drain overflow device, and maintenance of various pipes back to the water, return odor.

The toilet is an anti-flooding device, which is a flushing valve in the drainage field. It provides a kind of toilet anti-overflow device, which contains a sleeve, and its structural point is the upper and lower parts of the sleeve. The device is installed in the toilet between the porcelain and feces, down discharge. When the smell. The sleeve mouth firmly blocked, to prevent the pan, the effect is obvious, especially for high-rise and multi-storey building second and third floor households. The toilet seat anti-overflow device comprises a sleeve, characterized in that the sleeve is divided into upper and lower parts, the lower end of the upper sleeve is connected with the upper end of the lower sleeve and is connected with the stopper by screws